Logo

What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?

10.06.2025 02:33

What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?

2024–10–11 [Bobby Sanchez Bobby Sanchez ].

But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).

He then describes the function of a fuse.

What does it mean when a guy says he's afraid of falling for someone else after going through heartbreaks?

a photo is worth a thousand words.

(Dc diagram shown, AC is similar).

OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.

Trumpworld Is Fighting Over ‘Official’ Crypto Wallet - WIRED

So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.

But it can get overloaded, and no longer works.

This device then solves the entire problem.

Those Ice Baths May Not Be 'a Great Idea' - Newser

The other is “what does a “fuse” do?”

First Sentence:

One

Was Daenerys' downfall inevitable after she left Meereen in Game of Thrones?

What is lightning?

so, what happens?

The third is lightning and “how it gets conducted into a home.”

US valley fever cases may be 18 times higher than reported - CIDRAP

The bolt then partially travels down the line to your home.

This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.

At one ohm, the resistor has a maximum of 1 watt power.

Where the Stock Market Stands Now After a Wild Start to the Year - Bloomberg.com

Barnstars:

Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.

2024–10–10[John johnson John Johnson ]

Scientists find a boulder weighing 2,645,547 pounds that was washed inland by an enormous tsunami - Earth.com

This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.

“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”

the problem then depends on "how fast does the fuse operate?".

How old is planet Earth? Is it 4.5 billion years old or 6,000 years old?

What does a fuse do?

This is the picture of an electronic coil of wire wound around a core of magnetic material.

At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.

Seahawks coach sounds off on ‘crazy’ Sam Darnold QB controversy after $100 million star’s rough practice - New York Post

But… the neutral is now “floating” because of the 1 ohm resistance.

When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.

[image of Common-mode choke]

Forgotten in a collection, the discovery of this fossil presents a real problem for scientists as it doesn't belong to any known living family. - Farmingdale Observer

“ A fuse is a device which protects the (circuit) against overload and short circuit.”

Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".

These devices are installed between the “hot” and “neutral” and protective ground.

What does the Bible say about the Antichrist? How will we know when he arrives on the scene?

In schematic diagrams this is the symbol for a fuse:

Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.

Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.

This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.

There are two important concepts here.

An AC voltage/ current source, and an ac inductive load.

It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.

so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.

He then describes Rainy Season and Lightning.

For this case there are devices called Metal oxide varistors (MOV).

2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?

If the nominal power is 4,000 watts then the current at 230volts is 16 amps.

Here is a simplified AC power diagram.

So, the voltage could go up to 500 volts, and the fuse will not open up.

At least they know the answer if they wanted it.

He then asserts :

It also is a device that limits the change in current flow.

Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.

A circuit breaker is similar, but is resettable.

It seems Mohan does not understand the difference between a comment and an Answer.

And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.

This is 'the assistant's answer'

“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”

This is where the MOV conducts again, and dissipated the energy.

There are three different concepts here that are getting confused.

Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.

This is where this question deviates from being a 'generic' question, and becomes more specific.

So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.

There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.

This one hit behind the barn.

but I think this circuit , shows a few more pieces.

The MOV will conduct when the voltage exceeds 50% of line voltage.

2024–10–00 [ Ammar Mahdi ] Ammar Mahdi

2024–10–14 [Omar Gharbi Omar Gharbi ]

what exactly is a ‘surge’ protector?

eight

nine

2024–10–16 [ OO OLAOYE OYEBODE ]

Now when you have a certain ac resistance, then a current flows in a loop.

2024–10–11 [Victor Olarewsju Victor Olarewaju ]

One is “what exactly is in a ‘surge protector’ ? ”

Because the load is inductive, the current lags the voltage.(by a bit).

Upvotes:

but this device (an Inductor) … impedes the rapid changes in the current.

I post the exact comment here.

A fuse is a non-resetable over current circuit protector.

[old diagram got deleted by accident]

Can the fuse protect the electronic devices from lightning instead of a surge protector.

P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.

(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).

Edit 2024–10.

These are simplified answers to the original question, and does not change anything I wrote above.